This transistor ignition circuit give your car to have better starting and smoother running, particularly at very high and very low RPM. Lower fuel consumption, less pollution, lower servicing costs. Drive economically, drive electronically. Only for petrol/gasoline engines. This circuit will reduce breaker point wear and provide cleaner spark.
Circuit diagram:
Wiring diagram with the vehicles:
Circuit Notes:
This circuit used for cars with negative ground 12V negative ground system, maximum ignition current of 4A and maximum switching speed 500KHz. Motorcycles, mowers, boats, etc can also use this circuit.
For 6V Negative ground system, change the following resistors:
Car Transistor Ignition Specifications :
The kit of electronic transistor ignition is available at electronic online store. Download the manual transistor ignition kit manual from the following link:
Guitar Synthesizer Schematic Diagram In this post, we provide a collection of schematic diagrams of…
Handy Talky Schematic Diagram This is an old electronic scheme of the Handy Talky (HT)…
This is an old or "very old" schematic diagram of birdie tone or sound generator.…
Here is the 200W MOSFET amplifier powered based on four piece of IRFP250N, they are…
This is the 300W RMS stereo power amplifier circuit project. This amplifier is based four…
This is an active stereo tone control circuit using very well known op-amp IC of…
View Comments
As with the above inquiry; can this be modified to work on a positive ground
twin motorcycle, and would I have to parallel the coil primaries, and have the wasted
spark on the non compression cylinder.
can this circuit be modified to work on positive ground engines thank you?