mini fm receiver | Electronic Schematic Diagram https://electronicscheme.net Schematic Diagram & PCB Design Fri, 03 Oct 2014 04:16:56 +0000 en-US hourly 1 https://i0.wp.com/electronicscheme.net/wp-content/uploads/2017/05/cropped-transparent_text_effect.png?fit=32%2C32&ssl=1 mini fm receiver | Electronic Schematic Diagram https://electronicscheme.net 32 32 129969089 FM Receiver with TDA7021T https://electronicscheme.net/fm-receiver-with-tda7021t/?utm_source=rss&utm_medium=rss&utm_campaign=fm-receiver-with-tda7021t https://electronicscheme.net/fm-receiver-with-tda7021t/#comments Wed, 20 Jan 2010 06:57:44 +0000 http://electronicscheme.net/?p=384 This is the circuit diagram of mini FM receiver that build based on single FM IC TDA7012T. Components List: R1 = 8k?2 R2 = 10k? […]

The post FM Receiver with TDA7021T first appeared on Electronic Schematic Diagram.]]> This is the circuit diagram of mini FM receiver that build based on single FM IC TDA7012T.

FM Receiver with TDA7012T circuit diagram

Components List:

R1 = 8k?2
R2 = 10k?
R3 = 390?
C1,C3 = 10nF
C2,C6,C9,C16 = 100nF
C4 = 33pF
C5 = 25pF trimmer (Murata type TZB4Z250AB10R00)
C7,C10 = 1nF5
C8 = 820pF		 C11 = 1nF
C12 = 68pF
C13 = 220pF
C14 = 47uF 10V (Nichicon UWX1A470MCL1GB 5.5mmL chip type)
C15 = 3nF3
L1 = 36nH (4 turns 0.5mm silver-plated wire, inside diameter 4mm; length 7mm)
L2 = 1uH, SMD case 0805 (fres > 300 MHz)
IC1 = TDA7021T (SMD in SO16 case)


The TDA7021T integrated radio receiver circuit is for portable radios, stereo as well as mono, where a minimum of periphery is important in terms of small dimensions and low cost. It is fully compatible for applications using the low-voltage micro tuning system (MTS). The IC has a frequency locked loop (FLL) system with an intermediate frequency of 76 kHz. The selectivity is obtained by active RC filters. The only function to be tuned is the resonant frequency of the oscillator. Interstation noise as well as noise from receiving weak signals is reduced by a correlation mute system.

PCB Layout:

FM Receiver with TDA7012T pcb layout

This receiver is a mono implementation, but at the output, the entire multiplexed signal (up to 53 kHz) is available. By using a PLL stereo decoder, such as the TDA7040T, a stereo signal can be generated in a traightforward way from the output signal of the TDA7021T.

Download the TDA7021T datasheet include the schematic diagram how to make this circuit stereo.
[wpdm_file id=55]

FM Receiver with TDA7021T source: http://electroniccircuit-s.blogspot.com/2009/07/mini-fm-receiver-circuit.html

The post FM Receiver with TDA7021T first appeared on Electronic Schematic Diagram.]]> https://electronicscheme.net/fm-receiver-with-tda7021t/feed/ 1 384