lm386n circuit | Electronic Schematic Diagram https://electronicscheme.net Schematic Diagram & PCB Design Sat, 27 Jun 2015 22:57:52 +0000 en-US hourly 1 https://i0.wp.com/electronicscheme.net/wp-content/uploads/2017/05/cropped-transparent_text_effect.png?fit=32%2C32&ssl=1 lm386n circuit | Electronic Schematic Diagram https://electronicscheme.net 32 32 129969089 1W Stereo Audio Amplifier using LM386N https://electronicscheme.net/1w-stereo-audio-amplifier-with-lm386n/?utm_source=rss&utm_medium=rss&utm_campaign=1w-stereo-audio-amplifier-with-lm386n https://electronicscheme.net/1w-stereo-audio-amplifier-with-lm386n/#respond Thu, 27 Aug 2009 01:51:32 +0000 http://electronicscheme.net/?p=215 This is 1W stereo audio amplifier with LM386N. The output power is 1 watt for each channel, so it should be use two ICs of […]

The post 1W Stereo Audio Amplifier using LM386N first appeared on Electronic Schematic Diagram.]]> This is 1W stereo audio amplifier with LM386N. The output power is 1 watt for each channel, so it should be use two ICs of LM386N National Semiconductor for stereo channel. This circuit belongs to kitsrus.com and the kit is available there or at electronickits.com. This circuit only need 10mA current with best voltage supply is 6-12VDC. No heatsink required for normal usage.

1W Stereo Audio Amplifier with LM386N

There are only a few external components, the IC? contains most of the necessary circuitry. C1, C5 are? the input coupling capacitors, which block any DC? that might be present on the inputs. C2, C9 maintain? DC bias levels in the gain adjustment (feed back)? circuit. C4 provides power supply decoupling, and? C6, C8 are the output coupling capacitors. C10, R1? and C11, R2 act as zobel networks providing a high? frequency load to maintain stability where loud speaker inductive reactance may become excessive.? The pot provides adjustable input level attenuation.

Components List:

Capacitors:
C1, C5 2.2 uF / 50Vecap _________ 2
C2, C9 10 uF / 25V ecap _________ 2
C3, C7 100 nF mono (104) ________ 2
C4 100 uF / 16V ecap ____________ 1
C6, C8 470 uF / 16V ecap ________ 2
C10, C11 47 nF mylar (473) ______ 2

Resistors :
R1, R2 10 ohm ___________________ 2
Pot 1 10k ohm stereo pot ________ 1

Misc. :
IC 1, 2 LM386N __________________ 2
8 pin IC socket _________________ 2

Download the complete explanation of 1W Stereo Audio Amplifier using LM386N:

Icon

1W Stereo Amplifier using LM386N

1 file(s) 260.69 KB
Download Circuit Manual

Download the LM386N Datasheet:

Icon

LM386 Datasheet

1 file(s) 303.61 KB
Download Datasheet

1W Stereo Audio Amplifier Kit

The post 1W Stereo Audio Amplifier using LM386N first appeared on Electronic Schematic Diagram.]]> https://electronicscheme.net/1w-stereo-audio-amplifier-with-lm386n/feed/ 0 215