400W RMS Stereo Power Amplifier

Fri, 17 Feb 2017 15:18:52 +0000

This is the schematic diagram of 400W RMS stereo power amplifier which use power transistor to work. This amplifier in addition to providing good sound power, also with excellent quality and a high fidelity with low noise, to obtain the 400 watts we can put 2 speakers of 4 Ohms or 4 of 8 Ohms. The circuit require symmetrical power supply.

400W RMS Stereo Power Amplifier Part List

Transistors:

D1047 – 4 pieces
B817E – 4 pieces
A1015 – 6 pieces
TIP41C – 4 pieces
TIP42C – 4 pieces

Resistors:

6.8 ohms – 1W (blue, gray, gold) – 4 pieces
100 ohms – 1W (brown, black, brown) – 4 pieces
18K – 1 / 2W (brown, gray, orange) – 4 pieces
1K – 1 / 2W (black brown, red) – 2 pieces
10 ohms – 1W (brown, black, black) – 4 pieces
270 ohms – 1 / 2W (red, violet, brown) – 2 pieces
10K – 1 / 2W (brown, black, orange) – 2 pieces
330 ohms – 1 / 2W (orange, orange, brown) – 2 pieces
56 ohms – 1 / 2W (green, black) – 2 pieces
27 ohms – 1W (red, violet, black) – 2 pieces
820 ohms – 1 / 2W (gray, red, brown) – 2 pieces
0.47 ohms – 5W – 8 pieces

Capacitors:

0.1uF/100v – 4 pieces
47uF/63v – 2 pieces
2.2uF/100v – 2 pieces
330pF (ceramic) – 2 pieces
4700uF/63v – 2 pieces

Miscellaneous:

Diode 1N4004 – 10 pieces
Diode P600J – 4 pieces
2 coils of 10 turns with 1/4 copper core 18.
7 amp 33x33v transformer – 2 pieces

400W RMS Stereo Power Amplifier Top PCB Design

Power Supply Schematic for 400W RMS Stereo Power Amplifier

The power supply circuit is simple, you may use 10A transformer and 6800uf of capacitor. The diode value refer to the current value from transformer and it should be have higher value. For example if you use 7A transformer, then use 10A diodes.

Input Connection with Volume Control

This is the input connection for 400W RMS stereo power amplifier with volume control using a stereo potensiometer.

The post 400W RMS Stereo Power Amplifier first appeared on Electronic Schematic Diagram.

400W Power Amplifier “Safari”

Thu, 02 Jun 2011 02:40:20 +0000

This 400W power amplifier circuit often called as “safari” amplifier. The below circuit design is for single channel only, build two identical circuit for dual/stereo channels.

The 400W Power Amplifier “Safari” circuit diagram

The 400W power amplifier designed using two couples of power transistors that are TIP31 with TIP32 and 2N3055 with MJ2955. These types transistor are well known and widely used for the amplifier circuit and high current low voltage DC power supply circuit.

" data-image-caption="" data-large-file="https://i0.wp.com/electronicscheme.net/wp-content/uploads/2011/06/400W-Power-Amplifier-Safari.jpg?resize=630%2C380&ssl=1" src="https://i0.wp.com/electronicscheme.net/wp-content/uploads/2011/06/400W-Power-Amplifier-Safari-300x188.jpg?resize=300%2C188" alt="400W Power Amplifier - Safari" width="300" height="188" class="aligncenter size-medium wp-image-1017" />

Take a note that you must use aluminium heatsink (and a fan) to prevent over heating on the transistor (2N3055/MJ2955). This circuit require symmetrical/dual polarity power supply. You may use this dual polarity power supply circuit. Use 5A center tapped transformer with voltage output of 25V-0-25V or 32V-0-32V. The capacitor type is electrolytic capacitor, recommended value: 4 x 6800uF/63V (minimum). 10000uF will be better.

The post 400W Power Amplifier “Safari” first appeared on Electronic Schematic Diagram.

400w power amplifier | Electronic Schematic Diagram

400W RMS Stereo Power Amplifier