This is the schematic diagram of sound activated light or lamp. The lamp or light will be turned on while a loudy sound catch by the microphone (for example: hand clap)
How this sound activated light works:
The condenser microphone fitted inside a position to catch the sound and generates AC signals, which pass by means of DC blocking capacitor C1 for the base of transistor BC549 (T1). Transistor T1 as well as transistor T2 amplifies the sound signals and delivers current pulses within the collector of T2. When audio is generated in front from the condenser mic, Triac1 (BT136) fires, activates the light plus the bulb (B1) glows for about two minutes.
Circuit Notes:
Guitar Synthesizer Schematic Diagram In this post, we provide a collection of schematic diagrams of…
Handy Talky Schematic Diagram This is an old electronic scheme of the Handy Talky (HT)…
This is an old or "very old" schematic diagram of birdie tone or sound generator.…
Here is the 200W MOSFET amplifier powered based on four piece of IRFP250N, they are…
This is the 300W RMS stereo power amplifier circuit project. This amplifier is based four…
This is an active stereo tone control circuit using very well known op-amp IC of…