Comments on: Loudspeaker System Crossover Network https://electronicscheme.net/loudspeaker-system-crossover-network/?utm_source=rss&utm_medium=rss&utm_campaign=loudspeaker-system-crossover-network Schematic Diagram & PCB Design Sun, 20 Mar 2016 03:38:45 +0000 hourly 1 By: l.g.l.ranjith https://electronicscheme.net/loudspeaker-system-crossover-network/#comment-216636 Sun, 20 Mar 2016 03:38:45 +0000 http://electronicscheme.net/?p=19#comment-216636 usefull service

ranjith

]]> By: DIKACHI https://electronicscheme.net/loudspeaker-system-crossover-network/#comment-77633 Tue, 22 Mar 2011 13:52:26 +0000 http://electronicscheme.net/?p=19#comment-77633 pls i need a schematics for building a crossover for a loudspeaker with the mid-range speaker of 200watts and the tweeter of also 200watts

]]> By: ron https://electronicscheme.net/loudspeaker-system-crossover-network/#comment-73323 Wed, 09 Mar 2011 22:52:43 +0000 http://electronicscheme.net/?p=19#comment-73323 Nope! you should parallel the line side and connect the secondary in SERIES! that way you get a 24 volts center-tapped x’former. but be careful to use x’former with the same rating. If you connect the secondary in parallel, you also get 12 volts output.

]]> By: not quite https://electronicscheme.net/loudspeaker-system-crossover-network/#comment-68670 Fri, 25 Feb 2011 01:21:57 +0000 http://electronicscheme.net/?p=19#comment-68670 You parallel the primary (line) side, and SERIAL the secondary (12 volt) sides to get 24 volts. AC adds just like DC in this case. As a bonus, when you do this, you actually get at center tap on the 24 volt results. The serial connection works just like a center tap, if you need it.

BTW, the “capacitor voltage doubler” is for low current applications and only need one transformer. The capacitors are charged by the rectifiers, and add up like battery cells in series. But they can’t discharge much at all or they won’t be like batteries any more. So stricty low current if you need nice DC out. (Preamp, not power amp…)

]]> By: Roland https://electronicscheme.net/loudspeaker-system-crossover-network/#comment-45743 Mon, 27 Dec 2010 08:12:04 +0000 http://electronicscheme.net/?p=19#comment-45743 Yes you can combine two 12 volt transformer.Just parallel the primary side and the same with the secondary side.

]]> By: STEVE https://electronicscheme.net/loudspeaker-system-crossover-network/#comment-31461 Mon, 22 Nov 2010 11:33:52 +0000 http://electronicscheme.net/?p=19#comment-31461 Hello, You can use a “capasitor voltage doubler” based power suppy I belive.

]]> By: essel https://electronicscheme.net/loudspeaker-system-crossover-network/#comment-5144 Thu, 01 Jul 2010 17:46:13 +0000 http://electronicscheme.net/?p=19#comment-5144 please am an electrical student and want some help. please how can i connect two transformers of the same or different voltage to one circuit board like power amplifiers. I mean i have two 12volts transformers but i don’t know how to connect or combine to get 24volts and my power amplify needs 24volts power supply. A friend to told me u can held that’s why am in your mission. please help me.THANKS

]]>